The new tile saw that you just bought for your DIY project didn’t even last a week, did it?
While shaking your head in disappoint, you might get tempted to throw the whole machine away and promise not to buy this type of crap ever again!
It’s not the saw that’s at fault.
It’s the freaking poor-quality blade that came along with it!
Most of the time, the manufacturers end up including a cheap blade with their packages to cut down on their production cost and increase their profits by a great margin.
Not only these blades come with a shorter lifespan, but they also put stress on the machine’s motor and cause it to overheat or worse, get damaged beyond repair.
Don’t worry! We aren’t leaving you in this dire strait all by yourself!
Rather we have gathered around a collection of the best tile saw blade in this article from where you can pick up a suitable one that fits your budget and work comfortably by utilizing the machine’s full efficiency.
Let’s show you around!
Different Types Of Tile Saw Blade
Depending on the type of machine you have purchased, there are two types of diamond saw plates available on the market for you to choose from.
1. Wet Tile Saw Blade
If you have got a large project coming up, then it’s better to opt for a wet tile saw blade for this purpose.
You might wonder what’s so special about this particular saw plate?
Well, as you can already guess by the name, it requires water while operating. The water helps keep the temperature under control and makes smooth cuts.
Usually, this type of plate is used for cutting all kinds of stone, tile and fiberglass materials.
It’s also quite safe to use as the blade needs some kind of friction to operate and human skin is too soft for its mechanism to cut, burn or do any kind of damages at all.
2. Dry Tile Saw Blade
Dry tile saw plates are a bit on the rougher side.
These blades are meant for cutting hard ceramic tiles, concrete, stone and replacing old tiles as well.
As the dry mechanism doesn’t rely on water for its operation, it’s more likely that the blades will have a shorter lifespan in this case.
However, it’s easier to set this up and the best tile saw blade comes with everything pre-assembled for your convenience.
Top Tile Saw Blades Reviews
1. DEWALT DW4725 Dry Cutting Saw Blade
Check Best Price
Front yard landscaping is stylish, yet a simple way of decking up the entrance of your home.
However, cutting through the rock-hard stones, asphalt and pavers isn’t an easy job to do!
That’s why we recommend using the DEWALT DW4725 Dry Cutting Saw Blade for this purpose.
Not only this 4.5-inch tool is able to penetrate through hard materials with little effort, but also, its high-performance capability allows it to work at unbelievable speed at the same time!
Rotating around 13,300 times per minute, the DW4725 model is able to work on a wide range of different materials including Brick, Concrete, Block and Tiles.
With .08 inches of thickness, this plate also does an A.M.A.Z.I.N.G job of cutting at a quick pace while minimizing the dust level at the same time.
Although the plate comes with a 7/8-inch sized diameter hole, the package includes an adapter that can be used to adjust it to fit into a 5/8-inch size as well.
- The blade works at a faster pace while minimizing the dust level.
- It comes with 2 different arbor sizes.
- It can cut through brick, stone, tiles and block materials.
- It has 200X’s the life of a typical abrasive disk found on the market.
2. DEWALT DW4764-Blade for Tile, Wet Cutting
Check Best Price
Materials like Porcelain, Granite, Ceramic etc. are quite easy to get chipped and therefore, require special care while installing.
That’s why you need a tool with a softer bond for cutting through such materials.
DEWALT DW4764, for instance, is equipped with a Diamond Continuous Rim blade, which is designed in a way to provide a smooth, chip-free experience for you!
The 10-inch XP4 blade is fully compatible with high-powered tile saw available on the market, which allows you to perform straight cuts using the least amount of heat possible.
Want to hear something special?
DEWALT XP versions always come with some surprises and this one’s no exception!
With almost 6000 RPM capability, the DW4764 model has a 4X longer lifespan than any ordinary cutting plate!
On top of that, it comes with a 5/8 inches of arbor hole and a thin edge that allows the diamond plate to make a nice, clean-cut even out of softer materials like marbles without any chipping possibilities.
- It has a continuous rim design for easy cutting experience.
- The blade is flexible enough to be used on high-powered saws.
- It has a longer lifespan than any ordinary plates.
- It comes with 6000 RPM capability.
- With super-thin edge, it is the best tile saw blade for marble cutting.
3. QEP 6-8008BW Black Widow Wet Cutting Blade
Check Best Price
Featuring the most venomous spider of Northern America on front, the QEP 6-80088BW “Black Widow” blade made our list solely based on its premium-grade quality and high-speed cutting capability.
Interestingly enough, the price will come way under your budget if you are planning to purchase this one!
However, this 8-inch saw blade will astound you with its outstanding performance by rotating up to 7640 times per minute!
Not to mention, the thin-rim of this plate is segmented into micro parts to increase the airflow and minimize material dust while operating.
On top of that, it’s constructed with diamond-shaped laser cutouts for preventing any kind of wobbling during operation as well.
With a 7-millimeter of rim height and 5/8-inch of arbor size, the 6-8008BW is able to cut through materials like porcelain, ceramic, granite, marble or any hard masonry tile without any chipping and gives you a satisfactory experience by lasting for a long time!
- It comes with 7650 RPM capability.
- The blade is segmented into micro parts to minimize dust materials.
- It has diamond-shaped cutouts to prevent wobbling.
- It cuts through hard masonry tiles with utmost precision.
- The blade is designed to stay cooler during operation.
4.SKIL 79510C Turbo Blade
Check Best Price
For all the concrete-lovers out there who have been looking for a dry tile saw blade in our list, this one’s for you!
When it comes to resizing concrete, brick or blocks, many professionals rely on a grinding wheel for this purpose. However, it’s nearly impossible to achieve a finishing as smooth as a SKIL 79510C Turbo blade gives to these materials!
Right off the bat, this 7-inch diamond plate will surprise you by chewing on the concretes like there’s no resistance at all!
With a max 8500 RPM speed, SKILL is able to cut through pavers, fiber cement, quartz and asphalts as well.
The blade’s arbor size is around 7/8 inches in approximate and goes through as much as 2-inch deep masonry quite easily.
Although it’s meant to be used in dry conditions, it adjusts well with a wet tile saw machine and doesn’t malfunction if you use a little water to keep the dust to a bare minimum in a dry condition as well.
- It lasts longer than any abrasive wheel.
- It is compatible with both circular saw and grinders.
- It can cut through pavers, quartz, asphalts etc. with ease.
- It comes with a surprisingly low-price range.
- It gives a smoother finish while sizing different materials.
5. GoYonder Diamond Saw Blade for Cutting Ceramic Or Porcelain Tile
Check Best Price
Some of us like to work in comfort while some of us prefer a stylish exterior!
Well, GoYonder has found the perfect combination that will help you get both! With a mixture of dark red and purple color combination, this 7-inch plate looks quite stylish, I must say, with a gorgeous Burgundy shade on its surface.
Its super-thin 1.2mm mesh design adds the cherry on the cake by providing you with an extended lifespan and quick cutting speed as well.
Having trouble with finding the right size for your saw machine?
The good news is, GoYonder comes in several different sizes including 4, 4.5, 5, 6,7 and 8 inches for you to choose from!
On top of that, it gives you the flexibility of choosing your own work environment as it’s compatible with both dry AND wet tile saw machines! Cool, isn’t it?
You can use GoYonder for cutting porcelain, marble, slate, cement board, granite along with various other types of materials and achieve your desired shapes quite easily.
- It works on dry and wet conditions.
- It comes with various sizes for you to choose from.
- The plate has a stylish, eye-catching exterior.
- Its super-thin construction allows it to make precise cuts.
6. QEP 6-7003Q Premium Diamond Blade for Wet Cutting Porcelain
Check Best Price
Diamond blades with continuous rim segments are your go-to buddy if you want to slice stuff like porcelain, ceramic, marble and travertine tiles.
Have you been looking for something like that?
Then meet our newest addition, “QEP 6-77003Q”, the best tile saw blade for porcelain tiles, which comes with a 7-inch continuous rim diamond blade to serve your purpose!
If you’ve previously worked with other plates before, then you will clearly understand the massive difference this beauty possesses right after your first project!
The 0.6-inch thin blade cuts through materials instantly with little to no effort required! On top of that, it spins at a ferocious speed of max 8730 times per minute, making it one of the fastest tools on our list in terms of performance.
The 6-7003Q model is suitable for machines that accept 0.625-inch arbor size and is used for wet cutting purposes.
- It is suitable for slicing through porcelain and ceramic.
- The plate is designed in a way to minimize chippings as much as possible.
- It comes with a speed that goes up to around 8730 RPM.
- It helps complete your project in a short amount of time.
7. QEP 6-7006GLQ Glass Tile Diamond Blade for Wet Cutting
Check Best Price
Up until now, we have almost covered blades for all sorts of tiles available out there.
Guess what? We have missed one!
We haven’t talked about the GLASS tiles yet!
Without any further ado, let’s get introduced to the newest member of our list, the QEP 6-7006GLQ Tile Saw Blade, which cuts glass tiles like a pro!
To save you from any kind of unrealistic expectation, let’s make one thing clear first.
You can’t expect a glass tile to perform as fast as a regular tile saw!
As glass is a delicate material, it’s recommended to go at a slower pace to get the finest result.
The 7-inch diamond plate is compatible with most of the wet tile saw brands as it comes with a standard 5/8-inch arbor size. Along with its max 8730 RPM and 0.06 inches of thickness, this one is well capable of cutting through Porcelain, Ceramic and Mosaic tiles as well for your convenience.
- It is an excellent candidate for cutting glass tiles.
- It comes with a standard arbor size to fit most wet saws.
- The plate doesn’t make much noise while spinning.
- It is a suitable choice for any backsplash project.
8. MK Diamond 156651 MK-215GL Blade for Cutting Glass
Check Best Price
Good news for the glass artists out there!
We have another in collection for you guys!
The MK-215GL model is a little bit pricier than the previous one, I must admit. However, it’s worth every penny as the MK-215GL is made of premium-grade components and is widely used for industrial purposes all around the world.
One thing that really stands out about this 7-inch blade is that it’s compatible with a lot of different types of glass material including glass block, tiles and fused glasses.
And there’s a secret behind this super-power as well!
The MK-125GL is made of a special mix of diamond chip and metal bond formulation that makes it so adaptable.
You can pair up this bad boy with any good-quality wet tile saw out there and expect it to run smoothly. However, if you are looking for a professional finish, then it’s best to go slow and steady for that purpose.
- It’s made of premium-grade components.
- It doesn’t lose its sharpness for a long time.
- The MK-125GL is compatible with glass block, tiles and fused glass.
- It’s equipped with a special metal bond formulation.
- It gives you a smooth, chip-free cutting experience.
9. Piranha Wet Cutting Diamond Blade for Ceramic Tile, Porcelain Tile, Stone
Check Best Price
Have you ever encountered a hungry Piranha fish?
I hope you haven’t! As Piranha is famous for its razor-sharp teeth and deathly grip, it’s known as one of the most fearsome creatures in the freshwater!
Well, if you want to have a taste of that feisty bite in the saw plate, then let’s take a look at “Piranha Wet Cutting Blade” from the Delta Diamond Products Incorporated, which is as deadly as it sounds!
This 10-inch saw plate is capable of slashing through a wide range of materials including Granite, Marble, Porcelain, Slate, Terrazzo, Ceramic etc.
With 0.060 inches of thickness and a standard 5/8-inch arbor hole, Piranha is suitable for almost 99% of tile saws out there.
What’s more is that it comes with a 10-millimeter rim, which operates at 3600 RPM and offers the finest cut possible!
The heat-treated steel core of Piranha is able to withstand a heavy workload with ease and provides you with a commercial-grade service within a reasonable price range.
- It’s compatible with most standard tile saws.
- It has a heavy-duty steel core.
- The saw plate is able to cut granite, marble, slate, terrazzo etc.
- It operates pretty fast and lasts for a long time.
10. GoYonder Super-Thin Wet Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics
Check Best Price
Whether you are a professional or a DIYer, GoYonder always seem to come up with some amazing products for all classes of people!
The GoYonder Super-Thin Wet Saw Blade is just another example of the brand’s high-quality output that has managed to impress its consumers with its “X Teeth Turbo Mesh” design and wide applications.
The 4.5-inch plate comes with an ultra-thin thickness of 1.2-millimetre that allows it to cut through materials like Porcelain, Granite, Quartz, Sandstone or Ceramic quite easily.
Featuring an “X-teeth” design, GoYonder produces the least amount of dust while working and keeps the machine vibration system to a bare minimum so that you can work comfortably.
Need a blade for your dry tile saw as well?
Luckily, GoYonder saw plates are compatible with both dry and wet cutting styles!
With 7/8- and 5/8-inch arbor holes, it’s safe to assume you can use these blades with most of the standard tile saws and angle grinders available on the market.
- It’s suitable for both wet and dry cutting applications.
- The “X-teeth Mesh” design provides clean, smooth cuts.
- The saw plate has an ultra-thin rim structure.
- It’s compatible with most of the standard tile saws and hand-held grinders.
How to Buy Tile Saw Blade- Buying Guide
Answer: Amongst all the options available on the market, it’s so easy to get confused while deciding which one to purchase.
That’s why we have gathered around some features of a good-quality tile saw plate down below:
Before considering any other factor, you need to determine what type of material you are planning to cut first.
Is it Porcelain? Is it Ceramic?
Or is it something a little bit harder like Stones and Granite Slabs?
Depending on the cutting material there are various types of blade available on the market for you to choose from.
For a nice and smooth finishing, you will be needing a plate that can work up to your desired speed without a hassle.
For instance, you might want something that cuts fast if you plan to work on granite slabs or rustic tiles. In that case, it’s recommended to opt for a plate with turbo rim design. As this plate is designed in a way to produce more water while working, it remains cool while operating and allows you to work comfortably.
Size is another important factor when it comes to purchasing the right saw plate.
It determines the cutting depth of your project. The bigger the plate is in size, the larger the cutting depth you get from the machine.
Generally speaking, you will see plates ranging from as small as 3-inch to a generous 10-inch in size available on the market.
There are 3 different types of blades available for you to choose from.
They are called continuous, segmented and turbo rim types.
However, you can’t just pick any one of them as you wish!
These plates are specialized in cutting different types of materials according to their nature. You can select your preferred one from our tile saw blade reviews depending on those criteria.
Typically, all saw plates are made from a combination of diamond and other materials.
Still, the total construction varies from each other depending on the proportion of the materials. A poorly-constructed blade will have a shorter lifespan compared to the one with high-build quality.
So, you should check the manufacturer’s reputation and consumers’ experience before purchasing a particular saw plate.
Frequently Asked Questions
What Are The Parts Of A Tile Saw Blade?
Answer: Let’s have a look at the three main components of a tile saw plate down below.
The outermost layer of a plate is known as “Rim”.
It’s basically located at the edge of the plates and can be categorized into three different styles depending on what type of cut you want to practice.
The Continuous rim is the most popular one for cutting tiles, granite, ceramic, porcelain etc. This type of style features a smooth, chip-free design as they come with a solid, continuous rim design.
The Segmented rim is the one that’s fragmented into tiny bits of pieces along the edges to keep the air from flowing nicely into the space and lengthen the plate’s lifespan.
The Turbo rim features a serrated edge so that the plate is able to cut through things within a short period. It’s a combination of both segmented and continuous rim designs.
If you look carefully at the machine’s structure, you will see a metal bar holding the saw plate as a supportive component. That metal part is called an “Arbor”.
The center of an arbor is called an arbor hole, which is mainly responsible for making a connection between the bore and the shaft.
It’s important to know about the size of an arbor hole as you will have to attach the blade to the machine with the help of this bar.
Depending on the diameter of your saw plate, the arbor may vary from as little as 0.25 inches up to 1 inch or even more in size.
However, if you have already purchased the machine, then you might be able to find an adapter to work things out easily.
Depending on what type of blade you purchased, your tile saw plate may or may not have any teeth in it.
Teeth are something that helps the blade bite into the material with less pressure and cut through tiles quite easily.
However, the continuous rim saw doesn’t support this component. It’s often found in the Turbo rim design as an additional feature.
How to Sharpen Tile Saw Blade?
Answer: Since you are grinding on different materials using the saw blade, the diamonds are bound to get crushed and worn out over time.
So, what happens when they go all blunt?
It stops making any cuts at all!
That’s why it’s important to sharpen your plate from time to time.
Let’s take a quick look at how it’s done, shall we?
- First things first, you have to check the rim line around the plate’s edge to see if there’s any left.
There’s no point in sharpening a blade that doesn’t have any rim as it can’t be restored and it’s better to purchase a new one in that case.
- At this point, you will need a dressing stone to start the main procedure.
A dressing stone is, basically, an abrasive material that’s going to help sharpen your tool. You can use stuff like grinding stone, soft clay, asphalt or a breeze block for this purpose.
- Set the dressing stone in front of the machine in a way that the cutting head of the machine is barely touching the rim of the plate.
- Next, switch on the machine as it’s time to get started!
As the water starts flowing out of the cutter, adjust the volume a little bit so that the valve is almost half-open.
- Wear a goggle to protect your eyes and move the machine forward to make the desired cut carefully.
- You don’t have to go all the way in! Just cut through 2 inches into the material a couple of times and that will be enough.
Check to see if the water is running properly and soon you will notice a paste-like mixture that’s a bit rough texture-wise.
- Keep repeating this step while the rough mixture sharpens the plate through friction.
- All done?
Turn the machine off and wait a little bit until the plate stops rotating. Then, run your thumb carefully across the plate’s surface to see if there’s any dull spot left.
- If satisfied with the result, you can put the machine in its place. Otherwise, you may have to repeat these steps again to get the desired outcome.
How To Change A Tile Saw Blade?
Answer: As we mentioned in our previous point, it’s not possible to revive all saw plates out there. Some plates have just gone beyond any repair. In that case, you may have to change the plate entirely.
Let’s give you a short tour and show you how to do it in the right way:
- First, you have to access the saw plate. To do that, you need to remove the protective cover that’s placed on top of it. Depending on what model of saw you purchased, you may also need to unscrew the wing nut on top of it.
- Next, it’s time to loosen up the locking plate!
This part is pretty easy. You will need to use an adjustable wrench for this purpose.
The locking nut is located in the middle of the cutting plate. Use the wrench on the central bolt and backing plate to carefully remove them from the shaft.
You need to turn your wrench in a counter-clockwise direction to achieve your desired result.
- You are almost halfway done at this point!
Now, slide the plate towards yourself to remove it completely from the thread.
- Time to install your new plate in place and give it some action!
To do that, you will need to inspect the plate carefully to see if there’s any instruction labeled on top of the plate to give you some proper direction.
- Follow the arrow indicator of your manual and slide the new one in place accordingly.
- Put the locking plate and washer back into their respective places.
- Use the adjustable wrench to tighten the nuts properly so that they don’t fall off by accident.
Careful! Don’t go overbroad! Over-tightening can damage your machinery.
- Put back the cover on top of the cutting plate. If there was a wing nut in the previous setting, then it’s time to put that back into its place and tighten with the wrench.
All done! Now it’s time to enjoy the look of your brand-new blade and get the most of its cutting performance!
When Do You Know It’s Time To Change Your Saw Blade?
Answer: A dull blade will not only perform poorly but also, it will end up wasting your precious time and effort while you try to cut materials with it in vain!
However, typically, all tile saw blades are diamond-coated. And they tend to age a little bit differently than others.
So, we have gathered around some common symptoms that may indicate that it’s time to change your saw plate and put a brand-new one in its place.
- You will see a noticeable decrease in your blade’s performance. The plate will start cutting at a slower speed than it used to. Once you begin to struggle to get a clean cut like you used to have previously, it’s probably a good time to start thinking about a replacement soon!
- Another red flag is the appearance of the saw plate. As long as you can tell the diamond particles apart from the metal, it’s still usable.
However, the particles may get worn out over time and as a result, give the blade a smooth appearance. That’s when you should consider getting a new one in its place.
- Is your machine making a strange “buzzed” noise while operating?
Any unusual noise or vibration that didn’t exist previously might indicate the faulty mechanism of the plate.
If the thumping noise and vibration continues, then you should change the blade ASAP to keep your machine from getting overheated or stressed out.
- A sharp object like a saw plate is meant to go through hard and abrasive materials all the time.
However, oftentimes, we end up using it for cutting soft materials as well. This type of action makes the blade lose its glaze over time and turn it into a dull object.
Although it’s possible to revive its sharpness by using a dressing stone in this case, you can also replace the blade altogether to get the finest result.
Continuous Or Segmented- Which One Is Better?
Answer: That depends!
Continuous and segmented are two most popular rim designs available on the market.
However, before choosing either one of them for your next project, it’s important that you know both of their characteristics before finally deciding on which better suits your preference.
Let’s talk about the continuous rim design first.
So, basically, this type of blade is designed to have softer bonds for cutting hard materials like granite, glass, porcelain, stone and tile.
Wonder why this material needs some extra caution while working?
Cause they chip pretty easily!
That’s why, you need a solid, continuous surface that’s able to cut through these kinds of stuff without getting them shattered into pieces.
Usually, the size of these blades varies from 4 to 14 inches in diameters and they are compatible with circular and all types of tile saws available on the market.
Segmented rim features a medium to hard bond for cutting building materials like marble, granite, asphalt, brick, block etc.
You might have already guessed the difference, right?
Yep! Segmented rim design allows you to cut at a faster speed, however, it’s ideal for materials that don’t chip easily!
The biggest advantage of having a segmented rim-designed plate is that the blade tends to have a much easier time while cutting as the little slots help a lot improving the airflow in between the space.
Moreover, they keep the dust flow to a bare minimum and help remove the slurry once you are done cutting your desired material.
You can use this type of blade for both wet and dry applications. And the greatest part is that they come in all sizes and shapes for you to choose from!
In short, Continuous and Segmented blades are both a good option as long as you know what you need!
If you want something that’s able to handle materials without getting them chipped, then the Continuous rim design is your best bet! Things like tiles, glass, granite and porcelain fall under this category.
On the other hand, Segmented rim blades are a better option for materials that can handle medium to hard bonds for various applications. Typically, it’s used for cutting tougher materials like concrete, stone, asphalt, brick and block.
Have you picked your favorite one from the best tile saw blades of our list yet?
No matter what type of blade you have chosen to purchase, keep one thing in mind that each material cut at different speeds. For instance, you can’t expect to size up a rock as fast or as easily as a ceramic tile and so forth.
Also, if you want to extend the lifespan of the blade, it’s better to cut with less pressure and avoid large pieces of material altogether if possible.
Hopefully, your upcoming project will turn out great with these simple tricks and tips!
Don’t forget to wear safety gear while you work and stay safe!
I started this blog to provide an advanced guide and information to the people to choose the best product. Writing over every part of the tools. I try to cover every type of tool to review and information.