Creating a path, patio, parking area, or something else is a beautiful way of extending your living space. The areas are needed and also add more beauty to your living space. There are many things you may use to construct, but the pavers are more common and one of the best options.
The pavers are also available in various sizes, shapes, and hues. And they can be either stone made or concrete made. However, everybody wants to make the construction durable and long-lasting. Do you think the durability only depends on the quality of the pavers? No, not at all. The longevity and construction quality also depends on the foundation and the final layer of the sand. Yes.
If you can ensure you have laid the right amount of sand before installing the pavers, you can expect the construction will last longer. In fact, the final sand layer is very important for the construction, and that is why it is necessary to know how many inches of sand under pavers.
The Amount of Sand under the Pavers
You should have done all the previous tasks properly before laying the sand on the crushed stone. If you want to ensure better construction, then you should complete all the tasks properly. However, I think you have done everything well.
By this time, you are going to complete the foundation applying the final layer of sand. Right? But you can’t understand how much sand should be under the pavers.
Well, the ideal range of the sand under the pavers ranges from ½ to 1 ½ inch. You should not make the sand layer more thin/thick. But most of the pavers recommend making the sand layer 1 inch deep. One inch is the ideal thickness of the sand under the pavers. So, make the layer around 1 inch but don’t break the range. Remember it.
What Type of Sand Should You Use?
Usually, two types of sand are commonly used in most of the construction sites; coarse and fine. For this purpose, you should use the coarse sand for the pavers installation. Remember, your goal is to make such a layer that is smooth, level, firm, and solid surface for the pavers. In this purpose, coarse sand is ideal. Besides, this type of sand is also less expensive than the fine type. So, the sand is an economically friendly and good choice for the pavers installation.
Moisten and Tamp the Sand
Now you know how much sand is needed for the final layer. And you make the layer of sand. After laying the sand, you should moisten the sand. You will install the pavers on the sand, and that is why the sand needs to settle down as the way as it won’t settle down after installing the pavers. So, moisten the sand to settle down.
Then, tamping is also needed for the ultimate settle down. There also may have some air or the spaces between the sands, and you have to remove them. Tamp the sand well and get preparation for installing the pavers.
Apply Sand over the Pavers
It is such a task that you should definitely do. After installing the pavers, pour a few amounts of sand over the pavers. It is not necessary to apply more sand as it might be difficult to clean if applied more. If you see the site requires more sand, then you can pour otherwise not. This sand is applied for interlocking the pavers, and it also helps to create the ultimate connection with each other.
Clean the Cracks and the Surface of the Pavers
After applying the sand over the pavers, you need to clean the sand and the sand down through the splits. You can also get the help of a brush and push sweeper for this purpose. Brush in to fill the splits with the sand and make sure no hole remains without sand loaded.
After that, clean all the sand on the pavers and clean the paver surface well. After cleaning the surface, go for setting the sand with water. Now apply a little amount of fog over the surface using a nursery hose. After that, check the pavers again and ensure there is no hole.
This guide gives you the idea about the diameter of the sand under the pavers and gives you some other essential information. If you read the content carefully, you can get some essential tips to create a pavers surface. In the end, you should remember the construction will not be strong and long-lasting if you apply the sand more or less than the standard amount.