How to Clean Pitch Off of Saw Blades?

To hold the sharpness and new-look to your so useful saw blade, you need to clean them immediately when they get dirty. Using a dirty saw blade that has pitch layers over the teeth area is quite uncomfortable. You have to put double effort to work with it.

Normally, you don’t have to wash your saw blade every time after use. Just keep an eye on the blade when it gets dirty and clean the pitch off right away. Working with a dirty blade can cause burn to the wood you cut with it.

Cleaning a saw blade is pretty easy. But it depends on the method you follow. There are many ineffective and troublesome processes also. Don’t get upset with the wrong instructions.  Want to know how to clean pitch off of saw blades easily? Here are the effective cleaning processes below. Choose the one you like.

Here you go.

Cleaning Process

Here in this article, you will get to know the two easy saw blade cleaning methods. Both of them work tremendous with less effort. You can apply both the processes if your saw blade is too dirty. Check the cleaning methods below.

Method 1

To start this process first gather all the needed ingredients and then enter the cleaning process suggested below.

• Laundry Detergent
• Toothbrush
• Rust Inhibitor Spray
• Water
• Shallow Pan

Get them all for a proper start. Now go through the step-by-step instructions to clean your saw blade.

Step 1: Take a medium size mug and pour it half with laundry detergent and the other half with water. Make a liquid mixture of water and laundry detergent.

Step 2: Place the saw blade on a shallow pan and put the liquid mixture on it. Keep it like that for about half an hour.

Step 3: After 30 minutes take a used toothbrush and rub the whole blade. Especially, clean the teeth area very carefully.

Step 4: After that, spray the rust inhibitor spray on it and wipe with a cloth. You are done.

Method 2

Here are the needed ingredients to follow this cleaning process. Check them out.

• Window Cleaner
• Shallow Pan
• Bristle Brush
• Toothbrush
• Rust  Inhibitor Spray
• Cotton Cloth

After you get all the needed ingredients, you are all set to start the process. Here it is with step-by-step instruction.

Step 1: Wipe the saw blade with a dry cotton cloth to clean the dust and dry dirt.

Step 2: Now, put the blade in a shallow pan. Take the window cleaner and spray it all over the blade. Spray on the other side of the blade also.

Step 3: Keep it like that for at least 40 minutes. It will start to soften the pitch layer and make it easy to remove.

Step 4: After 40 minutes, take the bristle brush and rub the blade except teethes, Rub it well to clean accurately.

Step 5: Now, clean the teeth one by one with the used toothbrush until it’s properly clean.

Step 6: Mop the blade with the cotton cloth and apply rust inhibitor on it.

Step 7: Wipe the blade area after applying the spray and let it dry in air.

Verdict

The methods will let you have a perfectly clean saw blade. Just read the entire article accordingly and follow the steps exactly for the expected result.

Another important thing you should do before you clean your saw blade is, always take the blade off the table and then clean. If you continue cleaning it when it’s set on the table, there is a change of cutting your finger anytime. Stay safe and clean your saw blade carefully.

Hope this article helped you to know how to clean pitch off of saw blades easily. Thanks for being with us.